Size | 15mm (1/2”) to 100mm (4″). |
---|
End Connection | Flanged as per ANSI B 16.5 Class 150. |
---|
Stem Packing | Self adjusting, Spring loaded PTFE packing |
---|
Seating | Standard-Soft seat PTFE backed by EPDM. Optional-VITON/EPDM/ Buna Nitrile. |
---|
Characteristic | On-Off, normally close and normally open. |
---|
Working Temperature | On steam-continuous 155°C Intermittent 180°C. with Teflon seating, Buna Nitrile 80°C., EPDM 135°C., VITON 180°C. |
---|
Piston | Steel (Forming). |
---|
Actuator Spring | IS 4454 Grade III, duly painted |
---|
Operating cycles | Upto 50 mm 300 cy/hr, (Tested on air, on other fluids this figure may vary). For other sizes detail refer to Avcon. |
---|
Maximum operating pressure differential | Refer to graph. |
---|
Sales Point | Full ported flanged valve to give maximum flow, long life, simple in construction. |
---|
Back Pressure | Suitable upto 2.5 bar. |
---|
Pressure Temp. rating | As per ANSI B 16.5 Class 150. |
---|
Trim | St. St. AISI 304/316 Ground and hard chrome plated. |
---|
Plug and Seat | St. St. 304 or 316. |
---|
Leakage | Soft Seated Class VI , as per ANSI B 16.104-1976. |
---|
Working Fluid Press | Refer to table below |
---|
Actuator | Stainless Steel ASTMA351 (CF8). |
---|
Cylinder Flange | Stainless Steel ASTMA351 (CF8). |
---|
Piston Packing | Buna Nitrile |
---|
Actuator Working Pressure | 3.5 to 6 Bar (refer to graph) (Signal Pressure) inlet pressure depended. |
---|
Life Expectancy | Over one million cycles (lab tested in ideal condition) |
---|
Air Quality | Lubricated filtered and free of moisture. Shop air or dry instrument quality air. |
---|
Accessory | Air lock, Indicating limit switch box, Solenoid valves, Filter regulator gauge. Other accessories available on application. |
---|
Application | For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryer, gas generator and others. |
---|
Instruction Manual: | Refer to IM 5612/5622. |
---|