| Size | 15 mm (1/2”) to 150 mm (6”). |
|---|
| Body | Cast Iron : IS 210 Gr. FG 200 SG Iron- ASTM A536, Gr.60-40-18 (DIN 0.7043)(GGG40.3). Cast Steel: ASTM A 216 Gr. WCB St.St.: ASTM A 351CF8(SS304),or ASTM A351CF8M(SS316). |
|---|
| Pressure Temp. rating | As per ANSI B 16.5 Class 150. |
|---|
| End Connection | Flanged as per ANSI B 16.5 Class 150. |
|---|
| Trim | St. St. AISI 304/316 Ground and Burnished. |
|---|
| Stem Packing | Self adjusting, Spring loaded Teflon packing |
|---|
| Plug and Seat | St. St.: AISI 420/304/316 |
|---|
| Seating | Soft seated PTFE. Optional-Viton/EPDM, Buna Nitrile. |
|---|
| Leakage | Soft Seated Class VI , as per ANSI B 16.104-1976. |
|---|
| Characteristic | On-Off, normally close/open. |
|---|
| Working Fluid Press | Refer to table below |
|---|
| Working Temperature | On steam-continuous 155°C, Intermittent 180°C, EPDM 135°C, VITON 180°C. |
|---|
| Cylinder, Cover, Body & Piston: | Glass filled polyamide. |
|---|
| Actuator Working Pressure | 3.5 to 6 bar (refer to graph) |
|---|
| Piston Packing | Buna Nitrile. |
|---|
| Actuator Spring | IS 4454 Grade III, duly painted |
|---|
| Operating cycles | Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this figure may vary). For other size details, refer to AVCON. |
|---|
| Life Expectancy | Over one million cycles (lab tested in ideal condition) |
|---|
| Air Quality | Lubricated filtered and free of moisture. Shop air or dry instrument quality air. |
|---|
| Max. Operating | Refer to graph |
|---|
| Accessory | Air lock, position indicating limit switch box, solenoid valve, filter regulator gauge. Other accessories available on application |
|---|
| Application | For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryer, gas generator and others. |
|---|
| Back Pressure | Suitable upto 2.5 bar. |
|---|
| Instruction Manual: | Refer to IM 5812M/5822M |
|---|
