Product Specifications
| Size | 15 mm (1/2″) to 50 mm (2″) |
|---|---|
| Body and End Piece | Investment casted ASTM-A, 351CF8 (St.St. 304)/CF8M (St.St. 316). |
| Pressure Temp. rating | As per ANSI Class 300 |
| End Connection | Standard BSP(F)/ NPT(F). |
| Leakage | As per ANSI B16.104 – 1976 Teflon seating class IV. |
| Trim | S.S. AISI 400. |
| Stem Packing | Self adjusting, Spring loaded Teflon packing |
| Characteristic | On-Off, normally closed / normally open |
| Working Fluid Press | Refer to table below |
| Max. Temperature | On steam-continuous 180°C, Intermittent 205°C. |
| Cylinder Cover | S.S. AISI 304 Investment casted. |
| Piston & Yoke | ASTM A216 WCB Investment casted and plated. |
| Piston Packing | Spring loaded Teflon seal. |
| Actuator Spring | IS 4454 Grade III, duly painted |
| Act. Working Signal Pressure | (Main line pressure dependent), 3.5 to 6 bar |
| Operating Cycles per hour | 15mm, 20mm, 25mm upto 600 cy/hr. 35mm and 50mm upto300 cy/hr. (tested on air, on other fluids, this figure may vary). |
| Life Expectancy | Over one million cycles (lab tested in ideal condition). |
| Accessory | Air lock, Solenoid Valve, Filter Regulator Gauge. Other accessories available on Application. |
| Application | For control of steam, air, hot water, oil, gas, hydraulic oil. specially where heavy duty operations are called for, Specially for tyre. |
