1091 Cast Steel Sleeve Packed Water Level Gauge (Flanged)

1091 Cast Steel Sleeve Packed Water Level Gauge (Flanged)

1091 Cast Steel Sleeve Packed Water Level Gauge (Flanged)

Salient Features
  • Flanged End to BS 10 Table ‘J’.
  • Automatic Shut Off Device in Water Arm.
  • Available for both, Right Hand and Left Hand.
  • Premium Quality Sleeve, Reinforced by metallic eye holes, is provided to avoid any clogging of passage.
  • Each piece is fitted with self adjusting inverted taper plug (Stainless Steel) which forms a seal in the renewable moulded asbestos sleeve.
  • Sleeve can easily be positioned by a rib which fits in the corresponding   groove of the body.
Test Pressure (Hydrostatic) :
  • Shell : 48 kg/cm²g (700 psig)
  • Seat : 24.50 kg/cm²g (350 psig)
  • Maximum Working Temperature : 425°C
Product Enquiry

Materials

P.No. Name of Part Material of Construction Specification Qty.
1 Plug Stainless Steel ASTM A 276 Type 410 3
2 Gasket Steam Jointing Sheet IS 2712 Gr. W/3 4
3 Upper Arm Cast Steel IBR 73-80 Gr. B 1
4 Cone Synthetic Rubber IS 5192-1 2
5 Nut Stainless Steel ASTM A 276 Type 410 2
6 Washer Bronze IBR 282 (a) (iv) Gr. B 2
7 Glass Tube* Toughened Glass  – – – 1
8 Lower arm Cast Steel IBR 73-80 Gr. B 1
9 Ball Stainless Steel ASTM A 276 Type 304 1
10 Drain Valve Cast Steel IBR 73-80 Gr. B 1
11 Sleeve Bush Bronze  IBR 282 (a) (iv) Gr. B 6
12 Sleeve Moulded Asbestos  – – – 3
13 Nipple Stainless Steel ASTM A 276 Type 410 1
14 Union Nut Stainless Steel ASTM A 276 Type 410 1
15 Nut Carbon Steel – – – 3
16 Name Plate Brass / Aluminium – – – 3
17 Bonnet Stainless Steel ASTM A 276 Type 410 3
18 Stem Stainless Steel ASTM A 276 Type 410 3
19 Lock Nut Stainless Steel ASTM A 276 Type 410 3
20 Handle S.G Iron IS 1865 / ASTM A 536 3

*Glass Tube is not provided with this product.

Material Diagram

Sizes / Dimensions

Size (Inches) Size (mm) A
1/2 15 84
3/4 20 99