Product Specifications
Enclosure |
Waterproof enclosures are designed to IS 12063-1987 (IEC 60529-1989) Part – I IP-67 Protection,, Explosion/Flameproof enclosure are designed to IS/IEC-60079-1:2007 (IEC- 60529- 2001 IP-67), Protection class upto IP-67 |
---|---|
Coil Connector |
The valves listed in leaflet 9150 are provided with continuous duty, class ‘H’ insulation moulded coils. They are available for AC and DC supply,, rated to 18 VA on AC and 12 watts on DC supply. Every solenoid valve before leaving our factory undergoes high voltage insulati |
Note |
USE OF FILTER IN THE INLET SIDE IS HIGHLY RECOMMENDED. |
Solenoid Pilot Valve |
Solenoid Pilot Valve: For controlling the Pulse valve either for mounting directly on the flange or for remote control, solenoid pulse valves are available., They are specially selected for high frequency operation required for dust collector duty. Pilot solenoid valves can be mounted individually. |
Temperature |
The valves are normally rated for maximum fluid temperature upto 130°C when supplied with Hytrel Diaphragm. |
Installation |
Valves are mountable in any position without affecting operation, but as a general practice, to fit the valve keeping solenoid upright and above header tank is desirable |