SGR

Features

Gas regulator/governor for gaseous media, to be fitted to all types of gas consuming appliances.
Design incorporates inlet pressure compensation diaphragm ensuring high resolution.
Optimum dimension allows high volume throughout.
A purge line not required for DN 15 to DN 150 Size.
Fitted with separate working diaphragm and safety diaphragm, to ensure high degree of protection. design reduces operating torque

Product Specifications

Body	AISI Alloy Sand cast/Pressure die cast/Gravity die cast.
Internal Magnetic Material	430F
Operating Pressure	Please refer Table (2)
Closing Time	<=1 second
Ambient Temperature	(-)20°C to 60°C
Power factor	1
Standard Voltage	110/220/240 V + 10%/-15%, 50Hz 24V DC + 10%/-15%. In case of DC coils, a surge suppressor mst be used
Seats	Supplied in Buna Nitrile or on special request “Viton”
Type of Gas	All gases non-corrosive to aluminum material including Natural gas LPG, Methane, Bio gas Air or any other inert gas
Flow Rate	Please refer to graph
Switching Frequency	Arbitrary
Coil Protection	IP 54 according to IS-2147
Coil Insulation	Class “F”